How to Install a Walk-in Shower in your Bathroom

What is a walk-in shower?

A walk-in shower is a shower you step into without going over any obstacle or barrier. You walk in straight, unlike a bathtub, which you must step over. A walk-in shower doesnt have the slippery quality associated with bathtubs, reducing the risk of you suffering a fall. Most new homeowners are leaning towards bathrooms with walk-in showers because of the elegance and ease it brings to a home.

Types of walk-in showers for your home

If you cannot decide on a type of walk-in shower for your home, here is a list of the trendy walk-in showers you can get for your bathroom.

1. Modern walk-in shower

Modern walk-in showers are great additions to any home. It improves the look and quality of a home while making your life more comfortable. There are different types of modern walk-in showers to choose from. You can contact our contractors to help you find a suitable shower for your home.

2. Rustic walk-in shower

If you want a simple but elegant design for your home, this is the type of walk-in shower you should get. Rustic showers are affordable, and when done right, they will last for many years. A sure way to get this type of shower done is by using contractors from our platform.

3. Walk-in showers with half walls

This is a great choice if you want to add to the general look of your house. This type of walk-in shower may be more technical to install as it requires you to look for a solid surface on which you can place the half wall. And once it is installed, you need to seal it to prevent leaks.

4. Custom walk-in shower

A custom walk-in shower fits into your new home and can also replace your old shower. It doesnt take up much space and has better ventilation, thus preventing the possibility of mold and mildew.

5. Glass walk-in shower

This is the most popular type of walk-in shower in Nigerian homes. It could have popped up on your screen if you’d searched for showers. They are versatile and easy to clean.

6. Walk-in showers without doors

If there is something this type of shower does well, it gives you the perfect minimalist look. This type of walk-in shower gives an airy, open space, making you feel like you have a more spacious bathing area.

7. Corner showers

Corner walk-in showers usually come in rectangular or square shapes and are great for small bathrooms as they take up little space. Some designs come with curtains, and others have doors that swing open.

8. Curved shower enclosures

These come in varying sizes and shapes, allowing you to explore options to decide which suits your bathroom the most. They help you save space and can be an elegant addition to your home.

How to install a walk-in shower

If you possess plumbing skills, installing your walk-in shower may be easy. If not, it is best to engage the services of a professional. A quick scroll through our site will show a list of contractors who can help install your walk-in showers.

Step 1

You most likely have a bathroom youve been using. You will need to demolish it to create space for a walk-in shower. Remove the tiles, fixtures, door, drywall, and bathtub (if there is any). Shut off the water flow to prevent flooding.

Using the exact opening where your bathtub was is a way to ensure you do not have to create a whole new plumbing system.

Step 2

Take measurements to determine the amount of space and positioning of your shower. Confirm if your measurements are accurate, as a mistake here might be costly.

Step 3

You can now buy a shower installation kit after the measurements. You will find in the kit a showerhead, faucets, a hand-held shower, a shower arm, sealants and screws, a shower tray, a shower drain, waterproofing equipment, and a shower curb.

Other tools that will come in handy for a walk-in shower installation are a hammer, a utility knife, a power drill, a paintbrush, caulk and a caulking gun, a palette brush, screws, a circular saw, measuring tape, a hole cutter, chalk, etc. Even if you do not use all these, it is best to have them at hand.

Step 4

Now, you install the floor of the shower. Most shower trays come precut; you need to fix them properly, so they fit over your drain hole. You can cut a new one or stick with the previous one you have been using. For your shower tray to stay firm, apply a sealant to it. Tighten the nuts and apply pressure for some time.

Step 5

The next thing is to clean the area. After placing the shower floor, sweep around and clean up debris, drops of sealant, and dirt to avoid getting them into the drain hole.

Step 6

Now, you install your shower walls. So, there will be divots on the shower tray where you can place the walls. Some kits may also require you to drill the walls into position. A DIY kit will likely have everything done for you.

Step 7

Next, fix tiles that match the general aesthetic of your bathroom. You can also install glass enclosures.

Step 8

You can waterproof the bathroom and add fixtures. Waterproofing is essential to prevent leakage. You can use waterproof tape around the corners. Turn on the water to find out if anything is out of place or leaking. Youve successfully installed your walk-in shower.

Final thoughts

When remodeling, most people do not consider their bathrooms a priority. But it is perfectly okay to spice up the look of your bathroom since it is a part of your house. A walk-in shower gives a modern outlook that isn’t common in most houses, especially in Nigeria. It also doesn’t take up as much space as a bathtub will require.

Ready to give your home that elegant look? Whether you want to change the bathrooms look or add new fixtures, you can find some of the best contractors by sending in an enquiry.